The connection to the machines gets an easy insertion of the data and increases the productivity of the plant and the quality of the production process. If we look at the time an operator takes to insert a piece with all its geometry, according to our experience is of 45 seconds/piece. A transmission system to the machine via barcode minimizes the time to 2 secs/piece. The saving is significant.
The module allows to configure in the software Graphico the machine’ features and then print the production lists with the corresponding barcode.
Sistema de trabajo por posiciónSystem by position.
Working system by position and element.
The module allows to configure in the software Optimo the machine characteristics necessary for the optimization of the cutting cycles.
Working system by position.
The connection with machines such as Bat / Optibat, allows to send orders to the machines organizing them by position or element. The order is completely sent to the machine with the pieces lengths and all the necessary information.
Working system by position or element.
With Graphico Pro you can draw the elements included in the assembly information. Elements with beams and columns may include distributions of stirrups calculated automatically according to the pitch and length of the sections.
This information is sent to the machine of the pre-assembled by reading a barcode.
The efficiency of the machine increases considerably because it avoids the operator to insert large amounts of data.
Communication by barcode.
Uploading the elements through barcode reader and data transmission from the main server. The communication with mesh processing machines requires GrafoMesh.